Rajdeep Stamp, Best Stamp in Marking World

Instructions on how to Re-Ink SUN-STAMPER Pre-Inked Stamps

Remove cover from the top of the stamp, with care.
Select the proper color of ink and take the cap off of the ink bottle.
Holding the ink bottle over the ink tube in the stamp, gently squeeze the bottle.

Let 5 drops(maximum) of ink to fall into the ink tube. Do not over ink your stamp!

Place the cap back onto the bottle and the cover back on the stamp
For Full effect, it takes two or three hours for the ink to soak into the stamp.

Note : Use appropriate ink for pre-inked stamps.

Instructions on how to Re-Ink COLOPSelf-Inking Stamps

Push the top of the stamp down slightly (about 1/4")
Push in on the two buttons on the side of the stamp. This locks the stamp in place.
Place the stamp so that the cover (with the logo) faces you.
Push from the back of the stamp with your finger. The ink pad will pop out the front of the stamp.
Holding the ink bottle over the ink pad, gently squeeze the bottle. Let six drops (maximum) of ink to fall on the ink pad.
Do not over ink your Stamp!
Insert a pad back in place.
Once you have inserted the pad, push down on the stamp top. This will release the buttons that locked the stamp into the place.

Note : Use appropriate ink for pre-inked stamps.

Online Shop For Rubber Stamps